Best saw blade for vinyl plank flooring

This post contains affiliate links. As an amazon associate, I earn affiliate commission, from qualifying purchases.

Working with the Best saw blade for vinyl plank flooring is simpler. Even if you’re a novice, these 10 saw blades will assist you in woodworking.

If you have decided to set up the laminate flooring by yourself, then you will need to pre-plan some of the things in order to move ahead into the steps. Although, as hobby woodworking seems the most relaxing one, this requires much patience. Besides, a proper toolset is another big mandatory thing that will make your woodworking job easier. Simply put, professional equipment plays a pivotal role, even as long as you are a beginner.

Choosing a saw blade in this case is something that requires plenty of attention. That’s why you must have at least basic knowledge regarding the saw blades that hold the potential to cut the vinyl plank flooring. Well, there is a misconception that a genuine tool with a good sharp blade can cut everything and is good at every job. And vinyl plank is wood. These two are not true.

With that said, if you don’t know much about this, we’re here to tell you the best saw blade for vinyl plank flooring that works amazingly.


Oshlun SDS-0842 8-Inch 42 Tooth

Professional grade, Precision ground carbide tips , Carrying Case, 8 Inch, Dado Saw Teeth, Arbor: 5/8 Inch, Chipper Teeth: 6

DEWALT Dado Blade Set, 8-Inch, 24-Tooth

laser cut plates, accurate cuts , reduce splintering , 4-tooth chippers, Stainless steel shims, Heavy duty storage case

BOSCH DCB1072, 10-Inch 72-Tooth, Circular Saw Blade

Brute Carbide, Triple chip grind tooth, high quality of finishing,maximum performance, Extra-hard steel blade, Thinner kerf, developed for extreme performance

Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade

12x80T Diablo Blade, manufactured in Italy, easy to use, TiCo Hi-Density Carbide, extremely fast, durable, and clean cuts, Non-Stick Perma, Tri-Metal Brazin

IRWIN Tools Metal-Cutting Circular Saw Blade

Laser-cut saw blades, anti-vibration vents, carbide saw blade teeth, Anti-kickback, Circular saw blade is best for ferrous steel or thin steel, deliver longer life

List of the 10 best saw blades for vinyl plank flooring.

  1. Diablo D1080N – best Non-Ferrous Metal & Plastic Cutting Saw Blade
  2. Freud D1280X Diablo 12-Inch 80 Tooth – best ATB Crosscutting Saw Blade with 1-Inch Arbor
  3. BOSCH DCB1072 Daredevil 10-Inch 72-Tooth – best Laminated Panels and Melamine Circular Saw Blade
  4. DEWALT Dado Blade Set – best carbide teeth saw blade for vinyl plank flooring 
  5. Oshlun SDS-0842 8-Inch 42 Tooth – best Professional grade saw blade for vinyl plank flooring 
  6. Makita A-93681 10-Inch 80 Tooth – best Micro Polished Mitersaw Blade for vinyl plank flooring
  7. IRWIN 7-1/4-Inch – best Metal Cutting Circular Saw Blade for vinyl plank flooring
  8. OVERPEAK 10-Inch 72 Tooth – best Circular Saw Blade for vinyl plank flooring
  9. BOSCH TW21HC 21-Piece – best Jig Saw Blade Set for vinyl plank flooring
  10. DEWALT Jigsaw Blades – best Jigsaw Blades for Laminate flooring

Without further ado lets’ get started to discuss saw blades that can cut the vinyl plank with perfection.

10 Best Saw Blade for Vinyl Plank Flooring review

You may only get the greatest saw blade for vinyl plank flooring if you pursue professional woodworking. This review has all of the information you’ll need about specialized saw blades made specifically for vinyl planks. This piece of data can assist you in choosing the best product for yourself in the end.

1- Diablo D1080N 10’’ – best brand vinyl plank flooring Saw Blade

The best 10”, 80-point circular saw blade from Diablo is a high-quality and efficient performer that cuts vinyl plank flooring without producing any flaws.

The brand Diablo made this saw blade with TiCo titanium Cobalt carbide in order to make it the best saw for not only a vinyl plank but also for plastic, copper pipe, brass, aluminum, laminates, and non-ferrous materials.

This high-impact saw blade helps in achieving superior results – this saw is all about clean and accurate cuts. To give an extra burr-free and precise finish, this saw blade has Triple Chip Grind teeth.

With thin 0.094 inches, laser-cut kerf will help to get the accuracy and add up efficiency in the woodworking. If you are choosing this saw blade, you will be worry-free about the cutting of vinyl plank, even if you are a novice in this field.

As an added benefit, the stabilizer vents are attached in this saw that works to reduce the noise and vibration level. This anti-vibration feature makes it a good-to-go saw blade for woodworking purposes. You will feel strong and stabilized control as this feature prevent friction.

Diablo made this saw for durability as its teeth are shielded with Freud’s shock resistance TiCo Hi-Density Carbide. This formula maintains the sharpness of teeth sharp. Besides, the Perma-Shield non-stick coating is another feature that makes this blade heat and corrosion-free. So, for the longer precision, this saw blade is something worthy.

Moreover, this saw blade is supposed to be the best addition to your tool kit as it offers huge versatility in terms of functionality.

Key Specs

  • Manufactured by Diablo 
  • Item dimensions: 0.2 x 12 x 14 inches
  • Item weight: 1.45 pounds
  • Carbide material built 
  • Number of teeth: 80 
  • 0.094’’ laser-cut kerf
  • Blade running speed: 7000 RPM
  • Added with shock-resistance TiCo Hi-Density Carbide
  • Anti-vibration stabilized vents

What We Like

  • Vibration-resistance mechanism
  • Perma-Shield non-stick coating
  • 80 highly sharped teeth
  • Durable

What We Don’t Like

  • Over time the saw blade may bent

2- Freud D1280X Diablo 12’’ best design vinyl plank flooring Saw Blade

The Freud D1280X Diablo best saw blade is made for vinyl plank flooring and provides outstanding performance.

This 12’’ circular saw blade has 80 teeth which are super sharp and durable. This saw blade is covered with a non-stick Perma-Shield coating.

This protective shield makes it able to do a flawless and seamless job without any interruption. Meanwhile, this coated shield prevents heat and also decreases the level of pitch-buildup.

This saw blade is easy to use and convenient for beginners as well. So, if you are planning to work on vinyl plan flooring, you can buy this saw blade and you won’t be regretful about its purchase.

Well, if we talk about this saw blade manufacturer then Freud is a well-reputed company, producing such equipment for years. It weighs only 4.8 ounces and is made with an 80 sharp and robust blade that does the slicing of the vinyl plank job perfectly.

Due to its smooth and clean-cut, this saw blade is best rated on Amazon and thousands of people are buying it to fulfill their businesses.

Similar to the previous saw blade, this also is featured with the TiCo Hi-Density Carbide with Titanium. What it does is make its life longer and offers impressive work all time. Freud paired it with the laser-cut stabilizer vents. These vents are called basically a noise reduction mechanism and also helps the saw to make a precise cut. So, it doesn’t produce noise and vibration at all.

This saw blade is extremely helpful when it comes to functionality. It can work on various materials in a couple of minutes. How we can forget about the extra thin laser cut kerf that makes it as fast as lightning speed, and eventually gives speedy cuts. Overall, this saw blade is worth every penny.

Key Specs

  • Manufactured by Diablo
  • Item dimensions: 12 x 12 x 0.25 inches
  • Built with Carbide material
  • Designed with 80 teeth
  • Item’s overall weight: 4.8 ounces
  • Added TiCo Hi-Density Carbide with Titanium
  • Laser-cut stabilizers vents for noise and vibration reduction 
  • Featured with laser-cut kerf 
  • Coated with non-stick Perma-Shield 

What We Like

  • Fast and robust 
  • 80 teeth offer flawless cut
  • Trap noise and vibration 

What We Don’t Like 

  • It requires extra care to maintain the performance
  • Can get heated easily 

3- Bosch DCB1072 Daredevil 10’’ Saw Blade for vinyl plank floors

Bosch’s Daredevil is the best saw blade for vinyl plank flooring according to our expert LAB test and is also used for cutting different heavy materials.

However, for the construction use and woodworks, this saw blade will be helping you out all the way. When it comes to the build of this saw blade, we find a unique state-of-the-art for it its construction. 

The extra-hard steel with C4 micro-grain carbide was assembled so as to make the formula of this saw blade. And eventually, it performs so well and does work in a fast-paced, besides a long life span is a plus point of this saw blade. 

Bosch made this saw blade with 72 sharp teeth which have triple ground, so it can give a clean and smooth cut. Apart from all benefits, the Brute C4 Micrograin Carbide makes this saw blade fight with damage and keep it safe from rust and overheating. 

To give this saw blade a longer life, the manufacturer company coated it with a speed anti-friction finish, so it becomes able to slice through the vinyl planks or other types of material. Overall, the design of this saw blade offers maximum quality performance and the user gets an accurate finish. As an instrument, it helps a lot in various stuff and gives the best results every time.

Keys Specs

  • Manufactured by BOSCH 
  • Product dimensions: 12 x 14 x 0.31 inches
  • Product weight: 1.62 pounds
  • Carbide material construction 
  • 10’’ saw blade has 72 teeth
  • Brute C4 Micrograin Carbide added in its making 
  • Speed anti-friction finish coated saw blade
  • Thin kerf 

What We Like 

  • Finish and accuracy 
  • Best in price
  • Fast and durable 

What we Don’t Like 

  • Get heated easily 

4- DEWALT Dado 8’’ Saw Blade for vinyl plank flooring

About Dewalt’s saw blade, this is a tough tool with unique capabilities. The faster it’s and the long life it has. if you are searching for a high-performance best saw blade to work on your vinyl plank flooring, just close your eyes and go for it.

However, Dewalt is a big name in manufacturing construction-related equipment since the year. So, if you want to do vinyl plank flooring by yourself, this blade is an ideal choice. With 9.08 pounds weight, it has 15 by 3.2 by 12.5 inches dimensions.

Comparatively to its other counterparts, is crafted with 24 teeth. These fastest teeth cut through wood, laminates, and many other materials within a couple of minutes. It works well on softwood, hardwood, and melamine as well. Hence, proved that this is tremendous for people who are in the woodwork business. 

This heavy-gauge saw blade plate has a laser cut that allows it to cut in the right shapes as per requirement. So, if you are a business owner of woodworks or work for vinyl plank flooring, then this saw blade can be your go-to instrument for a vinyl plank flooring job. 

In order to enhance the efficiency of the saw blade, Dewald added carbide teeth in this 8’’ saw blade. The carbide contributes a lot to complete the job with perfection.

This saw blade ensures the maximum level of accuracy while cutting through the targeted object and minimizes the splintering as well. However, if you are looking for a blade that may last for longer, then you need to get hands-on with it.

There are two big reasons for its durability. With stainless steel, its shims are designed which is special to resist corrosion. 

Additionally, a heavy-duty case also protects this tool from humidity and moisture, so you can store it anywhere. Within the case, the teeth of blades won’t get damaged and stay sharp forever. 

Key Specs:

  • Manufactured by Dewalt 
  • Item’s weight: 9. 08 pounds 
  • Item’s dimensions: 15 by 3.2 by 12.5 inches
  • Number of teeth: 24 
  • Laser-cut kerf
  • 8’’ saw blade with carbide teeth 
  • Stainless steel built
  • Comes in a heavy-duty case

What We Like

  • Stainless steel construction 
  • Sharp and strong enough 

What we Don’t Like 

  • Expensive option 

5- Oshlun SDS-0842 8’’ – best vinyl plank Saw Blade

Oshlun is another well-reputed brand, that produces the best saw blades for the vinyl plank floors and other stuff for different types of machinery. 

Among the very best and unique range of blades, this 8’’ blade is also the best one. Overall, this saw blade is equipped with 42 Dado teeth, a 5.8’’ arbor, and 6 chipper teeth. With 10.5*9.9*3 inches dimensions, this saw blade is super comfortable and stable to use, and always ends with the best results. 

By adding C-4 micro grains in this gadget, the company has made it competent to cut through softwood, plywood, hardwood, vinyl plank, and plastic as well. With this huge bundle of capacities, this saw blade is, therefore, a practical saw blade for plywood. And if you’re a DIY person, it is going to help you. 

Without leaving any rough patches, the teeth of the gadget hold a maximum rate of precision and smoothness. And while doing the job, it traps the vibration and sound as well. Saw blade that makes too much noise and vibration find annoying. This blade doesn’t cause extra wastage. This is easy to set up and as you adjust it in the saw, it’s ready to work. 

Key Specs

  • Manufactured by Oshlun 
  • Item dimensions: 10.5 x 9.9 x 3 inches
  • Item weight: 9.94 pounds 
  • Carbide constructed 
  • Number of teeth: 42 
  • C-4 micro grains equipped saw blade
  • 5.8’’ arbor and 6 chipper teeth 

What We Like

  • Able to do wide range cuts 
  • Carbide constructed 
  • Good at all woods 

What We Don’t Like

  • You need to spend a good amount of money to get it 

6- Makita A-93681 10’’ – best affordable vinyl plank flooring Saw Blade

This Makita’s saw blade is supposed to be a good saw blade for the best woodworking of various types. With 600 grit its teeth are engineered with a micro-grain carbide that gives a perfect finish.

For having carbide teeth, this best saw blade resists the heat and sharpness at the same time. Softwood, hardwood, plywood, laminate, vinyl plank all are good-to-go with this saw blade. 

This saw blade is made of stainless steel, that’s why it has sturdy built. The hardened body of this saw blade makes it durable, so it’ll serve you for a longer period of time. Well, performance-wise it delivers a fine and clean-cut and doesn’t tear out or shred. In terms of stability, it offers smooth and strong stability, so you can work for hours. 

With the 5-degree hook angle, this saw blade is equipped with ultra-thin kerf with a thickness of 0.71 inches. For getting fine cuts through vinyl planks and flooring this saw blade would be a great addition to the garage. 

Key Specs:

  • Manufactured by Makita
  • Item dimensions: 12 x 11.8 x 0.2 inches
  • Item weight: 1.75 pounds
  • Carbide material construction
  • Number of teeth: 80
  • 0.71’’ thickness
  • 600 grit teeth

What We Like

  • 5-degree hook teeth
  • Carbide construction

What We Don’t Like

  • Makes noise
  • Tough on budget

7- IRWIN – best Cutting Circular Saw Blade for vinyl plank floors

Similar to other best saw blades, this one is also a good match to work on vinyl plank flooring. This saw blade doesn’t only fully functional on various types of woods but it can give an ideal and best cut-through on steel also.

This is a laser-cut blade that is superb at sharpness and perfection in work. Added with anti-vibration vents keeps it away from wobbling and the user gets 100% accurate and straight cuts every time.

As its counterparts are designed with carbide teeth, this also has metal-grade carbide teeth that extend its lifestyle and performance as well. So, about durability, you won’t regret buying it. This is going to stay with you for years and will help you to complete so many tasks.

One different thing we find in this saw blade is, it comes in an anti-kickback tooth shoulder that ensures safe cutting. It prevents the production of sparks during work. With 68 teeth, this blade is designed to offer ease and perfection at the same time with this single gadget. You can comfortably use it even if you are a beginner.

Key Specs

  • Manufactured by Irwin Tools
  • Item dimensions: 9.61 x 8.11 x 1.01 inches
  • Item weight: 0.78 pounds
  • Number of teeth: 68
  • Carbide material built
  • Kick-back tooth shoulder

What We Like

  • Reduce friction and sparks 
  • Budget-friendly 
  • Sade and secure 

What we Don’t Like 

  • Over time, the sharpness may dull 

8. OVERPEAK – best Finish Saw Blade

OVERPEAK Circular Saw Blade is specially designed for cutting vinyl plank flooring, with a fine finish and 10-inch diameter.

The blade is made of premium quality materials, with 72 teeth and a 5/8-inch arbor size. It also features an ATB grind style and thin kerf design, for smooth and accurate cuts.

Get the job done faster and with less effort. OVERPEAK saw blades are made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.

6 Laser-cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp.

OVERPEAK Circular Saw Blade’s innovative design means you can get more cuts out of each blade, saving you time and money.

Key Specs

  • Overpeak is the manufacturer.
  • Item Weight: 0.634 ouncesn
  • Package Dimensions ( inches) 11.3 x 10.91 x 0.28
  • Carbide material
  • 10-Inch 72 Tooth


  • cut 2″ wood and 3/8″ bamboo planks like butter
  • with a single sharp you can work for at least 3 rooms
  • long lasting


  • some complain on cutting slowly

9. BOSCH TW21HC Woodworking Jig Saw Blade Set

BOSCH TW21HC Woodworking Jig Saw Blade Set is our expert recommended best saw blade for vinyl plank flooring. Made with the best materials and an optimized tooth geometry, these blades offer excellent performance in both thinner and deeper woodcuts.

This Bosch TW21HC woodworking jigsaw blade set is perfect for making clean, fast cuts in wood and plastics. The side set and ground teeth offer a superior level of performance, while the design of the jigsaw blade teeth makes it easy to cut through materials quickly and efficiently.

Key Specs

  • Manufacturer bosch
  • Item Weight is 15 ounces
  • 1 Inches thickness
  • 21 Number Of Pieces in a set


  • Cutting wood and wood products
  • Precision-ground teeth for clean, fine cuttining
  • Money back guarantee for 30 days


  • The case is a bit oversized

10. DEWALT Jigsaw Blades – best for Laminate Down Cutting

The DEWALT DWA4216 Jig Saw Blade, 10-Inch is a 5 pack of 4″ blades. The product features a U-Shank and is ideal for cutting laminate flooring.

This blade also has a down-cutting tooth configuration with 10 teeth per inch. It also comes with precision ground teeth that stay sharper longer and deliver smooth, clean cuts.

The deeper gullets remove more material in less time for faster cutting. This product is manufactured in the United States and the tone of voice should be informative so it’s not too much about the company

Key Specs

  • Manufacturer is Dewalt
  • Product weight is 1.27 ounces
  • demension is 4 x 0.39 x 0.39 inches
  • Stainless Steel material
  • Comes with 1 Year Full Warranty


  • made in United States
  • teeth stay sharper longer
  • deliver smooth, clean cuts


  • Doesn’t fix with brushless jig saw

Buying guide Best saw blade for Vinyl Plank Flooring

What to consider when buying a saw blade? Well, this is not a tough question anymore. However, some things are needed to be concerned, if you want to buy the best saw for vinyl plank flooring. Saw blade is the most crucial tool and its application leaves a huge difference. So, we suggest being attentive to the quality as always and never settling on low. 

Especially, work like vinyl plank flooring, obviously, you’ll invest a good sum of money and just due to a bad quality saw blade, you don’t want to ruin all of your money and effort. Because appropriate and clean cutting of the vinyl plank is something extra important.  

A supreme quality saw blade will meet the standard quality results. That’s why you should always stick to high-end quality tools for your toolkit. 

However, these are some points that will help you to decide the best saw blade. 

1-Number of Blade’s Teeth and their sharpness 

At the very first, you must know the specifications of the saw blade, and the blade’s teeth are one of them. As the role of blade’s teeth brings massive difference, you need to get hands-on the saw blades that have at least 70 or up to teeth. But keep in mind these teeth must be robust and dangerously sharp. The more the sharpness of the saw blade, the more regular and refined edges and cuts you’ll get. 

2- Carbide Tipped Saw Blades – for longevity 

The sharpness and good performance stay alive of the saw blade if it’s a carbide-tipped saw blade. It’s is a material that added in the formulation of saw blades’ teeth. So they can run in the long run. Besides, saw blades having carbide teeth can easily handle hardwood, softwood, and plywood. So, functionality becomes enough high with the carbide added saw blade. 

3-Compatibility of the Saw Blade 

Different saw blades perform differently. There are a huge number of varieties you’ll see on the market. But what’s the matter is the compatibility of the saw blade to the work you’re planning to do and also to the machine. So, always do prior research of what type of saw blade you want and then visit the market. 

Frequently Asked Questions

What is the best blade to cut vinyl plank flooring?

The best saw blade must have 80-100 blades, carbide tipped, and super sharp kerfs. This all gather and cut through the vinyl plank with perfection. 

Does a saw blade with more teeth is better?

Yes, a good number of teeth determines the saw blade’s speed, and finish. However, saw blades with fewer teeth can also perform well, but to get the perfect finish, a saw blade with more teeth is an ideal choice. 

Which saw blade forge the finest cut?

So as to get the finest cut-through saw blades, you just need to invest in the premium quality saw blade. That is all. A good quality saw blade is the best fit for all your woodwork. 

Does saw blades become dull?

Yes, after every use, there is a huge chance of getting dull of the saw blade. However, the good quality saw blade lasts with sharpness for a longer time. 

Can you cut vinyl flooring with a miter saw?

A miter saw is an excellent tool for cutting vinyl flooring. The pieces of flooring can be cut with ease. It delivers a clean, straight finish that other saws don’t offer. It also cuts smoothly at an angle, which is the best feature for a miter saw.

Can you cut vinyl flooring with a table saw?

A table saw is a fantastic and often-used tool for cutting vinyl plank flooring, especially when ripping. A rip cut is when you cut the planks along their length.

Does a hand saw is perfect for cuting vinyl flooring?

Yes, you can cut vinyl planks flooring with a hand saw, but I don’t recommend it. since the finest saw blades have finer teeth. Vinyl planks may be easily damaged by big teeth on the edge. As a result, if you want improved results,


Working on vinyl plank flooring can be tricky and challenging too if you’re a beginner. However, if you choose appropriate and professional equipment, your job can be so much easier. So, herein, for your help, we discussed in detail about best saw blades for vinyl plank flooring and that information will help you to cut through the vinyl plank and other materials too. This piece of information will lead you to choose the best saw blade for your task. 

Leave a Comment