How to raise shower head?

Many people want to know how to raise shower head. Raising the height of your shower head is not as easy as it sounds and can be pretty complicated.

It’s not a secret that many of us have had to deal with the problem of having our shower heads too low. It is exhausting to have to bend over every time you want a nice, refreshing shower. Luckily for you, we are here to present some solutions! This post will go over ways to raise your shower head and make it more comfortable and easy for yourself.

Our step-by-step guide on how to raise shower head will help you to fix the issue. It is also important to note that this process may not work for all showers due to the design of your plumbing system, but it should be worth trying before spending money on something that might work. 

7 Easy Steps to Raise Your Shower Head

It’s easy to get the perfect height when you raise your shower head. Here are 7 simple steps that will help you do this:

• Measure the height of your shower head. If it is not at a consistent level, measure from the floor to where you want the new location for your showerhead and mark that spot with tape or chalk.
• Find an anchor point such as a stud in the wall or mounting bracket directly behind your desired destination on the wall (this will act as a backstop). Drill holes into this position using tools like drywall anchors and screws if necessary. The hole should be wide enough so that when mounted onto it, there are no gaps between them – about ¾”. Put one end of pipe fitting through each hole before tightening inside by hand until snug but still able to move up & down without much resistance.
• Make sure the new height is at a level you are comfortable with. If it’s too high or low, make adjustments as needed and repeat steps one through four until satisfied.
• Place the backstop in position behind the location of your desired showerhead.
• Put the end of pipe fitting, which has no threaded piece on top, into a hole drilled in the wall/backstop (making sure to use anchors and screws if necessary). Do not tighten by hand this time – instead, use pliers to give an even pressure while turning clockwise until snug but still able to move up & down without much resistance. Repeat for the other side so that two pipes stick out the front edge of the wall holding up your shower head!

Bonus Tips:

• Use a level to make sure the pipes are perfectly straight. If they’re not, use your hands and bind them until you achieve perfection!
• When installing a backstop, the two pieces of pipe must fit snugly against each other but with room for movement if one side is pulled or pushed out more than the other. Mainly if the showerhead will be used by children who may want to aim water at their friends and themselves! 

Some other methods to raise a shower height

1. The first way to raise the shower height is by adding a tile-cutter. The most common method of adding a tile cutter and raising your shower is using either an inline or angle grinder with the appropriate blade attachment. It will allow you to cut out any tiles in front of where you want to raise your new base.

Then use adhesive mortar on both sides, so there’s no risk of it coming loose over time from excess moisture going down into those seams. You can also place pieces of mirror glass behind this newly raised area for extra effect! There are other material options: concrete blocks work great too if they’re heavy enough on one side. Moreover, metal yard signs work similarly and will help in the raising of your shower height.

2. The second way is by using a shower lift. It is an easy and affordable option for the do-it-yourselfer that doesn’t want to hire someone or spend any money on materials. You can get them online, take one out of the box, connect it up right under your existing showerhead. After that, raise your height by adjusting the footpads with just a few simple turns!

How to install a new shower arm?

It’s quite simple. Here is our complete guide to install a new shower arm.

1) Screw in the pipe to the wall using screws and anchors depending on what you have available. After that,  slide the remaining pipe over onto the existing pipe before screwing in both ends of the pipe with pliers or wrench. Put a couple of drops of blue thread locker on each end when finished if desired for security reasons.

2) Connect water pipes (usually sold as part of the kit). Make sure that pressure is released by turning off the valve at the bottom of the faucet. It will allow any air trapped inside pipes to escape before connecting fittings together (you may need pliers). If two hoses are coming out from the backside of the spout instead of one hose, use a rubber gasket to seal the connection.

3) Connect shower heads (usually sold as part of the kit). You may want to use pliers or wrenches for this step, depending on which type you have and how difficult it is to tighten the hose fitting onto the spout. When finished tightening, make sure not to over-tighten so that water will still flow through freely.

4) Turn on the faucet fully at the bottom of the pipe before turning off the valve to flush out any remaining air from pipes and turn the valve back on afterward. If there are no leaks after a few minutes, you’re done!

5) Check for restrictions by using a garden hose with a sprayer nozzle attached; if your shower doesn’t get enough water pressure, you’ll need to call a plumber.

6) Consider installing an anti-scald device if one is not already in place. It will help prevent burns and regulate the temperature of the water by turning it down when the water gets too hot and up again once it cools off.

7) If there are no leaks after all this work or your shower still doesn’t get enough water pressure, it’s time to contact a professional. They can diagnose what may be wrong with your pipes and fix any problems that might contribute to low water flow (can include replacing old valves).

8) Make sure everything is connected correctly before testing out the new installation! It should feel like coming home from vacation

Conclusion:

If you want to know the best way about how to raise a shower head, we’ve got tips and tricks for that. Follow our tips below, so next time when you get in the bath or take a hot shower, everything is just right. If there are any unanswered questions after reading this article, let us know in the comments below.