Best Vinyl siding blade in 2022

If you are looking for an easy way to install vinyl siding blades on your home, we will discuss the process using essential tools like a screwdriver and power drill.

When you buy a vinyl siding blade for your home, one of the most important factors to consider is whether or not you have a saw that can cut through sheets of vinyl. Unfortunately, many people don’t think about this until they’re at Home Depot and find out they need a blade for their saw to install their new vinyl siding. Unfortunately, if you don’t have the right edge, it’s going to take much longer than it should to finish installing your new roof. 

In this article, to go over what blades are needed for cutting different types of materials, as well as some tips on which blades work best with certain materials so that when you head down to Home Depot next time, you’ll be able to make an informed decision.

List of the 5 vinyl siding blade

1. Malco vcb2 EV – best durable vinyl siding blade 
2. IVY Classic 35056 – best cheap vinyl siding blade
3. Oshlun SBNF-120120 – best smooth cutting vinyl siding blade
4. Freud LU5A20 – best Aluminum vinyl cutting blade
5. Evolution RAGE 355 BLADE – best vinyl cutting blade under $70

Quick overview of the 5 vinyl siding blade

Products Name	Features
Malco vcb2 EV	10-inch vinyl siding and fences. Circular Cutting Saw Blade
IVY Classic 35056	Swift Cut 10″ 200 Tooth Aluminum & Plastic Cutting Circular Saw Blade with 5/8″ Arbor, 1/Card
Oshlun SBNF-120120	12-Inch 120 Tooth TCG Saw Blade with 1-Inch Arbor for Aluminum and Non-Ferrous Metals
Freud LU5A20	420mm 96 Tooth Carbide Tipped Blade Ideal for Cutting Aluminum and Non-Ferrous Metals
Evolution RAGE 355 BLADE	14” Multi-Material Blade, Silver

Vinyl siding blade Feature:

A Vinyl Siding Blade Feature is a blade that has been specifically designed to provide an economical and efficient way of cutting vinyl siding. Vinyl siding installation can be one of the most frustrating jobs in the construction industry because it is time-consuming and difficult for inexperienced workers to cut. As a result, vinyl siders often resort to using knives or other tools, leading them to make mistakes such as tearing the vinyl when they are not careful. A Vinyl Siding Blade Feature is a much safer and more effective tool that will allow you to work quickly and safely while reducing your costs by eliminating the need for extra materials like shears, knives, etc.

• Designed for a more excellent range of cutting applications, the Empower 248HLF01 honed blade is perfect for vinyl siding and fence posts. 
• This lightweight hedgehog lives up to its name by providing ultra-smooth cuts that are free from hooks or pulls because it has less material removed with each swipe to its large 10″ (254 mm) diameter, making more deep, more efficient cuts on wide panels as well single pass accurate work possible when installing anywhere you need an edge!
• The blade of this saw is designed to cut at 6500 RPM within a wide temperature range, reaching 100 degrees below zero for operations that call for it.
• Designed specifically for cutting vinyl fences, this tool features a neutral no-hook angle and 100 count carbide-tipped teeth. 
• With a .090” (2-3 mm) blade thickness that ensures consistent, smooth cuts with less pull into the material, its durable solid chisel points will get you through those tough-to-cut areas on your fences!

Malco vcb2 EV – best vinyl siding blade

Product review:

Malco vcb2 EV Circular Cutting Saw is the best durable vinyl siding blade designed to handle tough cutting jobs. The edge is equipped with 248 teeth that are 6500 rpm with a universal adapter. It has a smooth cut range more significant than most blades, which generates ultra-smooth cuts in thick materials like vinyl siding and fences. The cutting depth can be adjusted using the depth gauge wheel located at the front of the saw.

The Malco blade is cut vinyl siding and fence. The edge has a 10-inch diameter, making it easy to use for cutting any length of material. This design makes it easy to make cuts with minimal effort. In addition, the blade is made from steel and comes equipped with a universal adapter, allowing you to use it on most electric or gas-powered saws.

Technical Detail

Malco’s 10-Inch Circular Cutting Saw Blade is a versatile blade for cutting vinyl siding, fences, and plastic trim. The weight of this blade is 1.32 pounds, and its dimensions are 10.25 x 10.25 x 0.5 inches.

Features:

SMOOTH BLADE

• The Malco VCB2 EV Circular Cutting Saw Blade is a soft blade used on vinyl siding and vinyl fences.
• Smooth cut range and more excellent range of cutting thickness generates an ultra-smooth cut flat ground neutral no-hook angle.

VERSATILE 

• It features 248 teeth and an adapter for universal use. This blade has a smooth cut range of 0-1/8 inches.
• The Malco VCB2 EV is a circular saw blade that has been specifically designed to cut vinyl siding and is versatile.

PERFECT FOR USE 

• Oiling and cutting operations are optimal at 6500 RPM within a wide temperature range of 100-degrees down to 20-degree Fahrenheit.
• The 6500 rpm allows you to make cuts up to 1/8” thick in one pass. 

Pros:

• Ultra-smooth cut with less pull
• 248-tooth configuration 
• It fits most powerful miters

Cons:

• Someone complained about blades warp so bad

Why do we recommend this product?

This blade is the perfect choice for contractors who want to get through their projects quickly. With this blade, you can cut up to 10 inches of material in one pass. It also comes with a universal adapter that allows it to work on all major brands of saws.

IVY Classic 35056 – best saw blade for vinyl siding

Product review:

Ivy Classic is the best Tooth Aluminum vinyl siding blade with 5/8″ Arbor, Steel blade designed cutting light gauge aluminum plastic and vinyl siding up to 1/8″ thicker than 1/8 High carbon-alloy steel blade Precision ground teeth set for smooth, accurate cuts outstanding cutting performance heat build-up eliminate warping.

The high carbon-alloy steel blade is designed to cut through heavy-gauge metals quickly and easily. Heat build-up eliminates warping and keeps blades cooler, allowing them to last longer. 

Technical Detail

The high carbon-alloy steel blade has precision ground teeth set for smooth, accurate cuts, outstanding cutting performance, and heat build-up to eliminate warping. The weight of this blade is 1.83 pounds, and its dimensions are 10 x 10 x 0.1 inches.

Features:

EASY TO USE 

• Our lightweight saw is designed to easily cut through aluminum, plastic, and vinyl siding precision ground teeth set for smooth, accurate cuts. 
• Outstanding cutting performance in a variety of applications.

PRECISION GROUND TEETH 

• Set for smooth, accurate cuts. The superior blade design allows for easy use and outstanding cutting performance in a variety of materials. 
• Light gauge aluminum, plastic, and vinyl siding up to 1/8″ thick; thicker than 1/8″. 

SWIFT CUT 10″ 200 Tooth Aluminum Blade

• A high carbon alloy steel blade resists heat build-up that can cause warping.
• Ideal for various applications, including windows, doors, gutters, trim work, and more.

Pros:

• High carbon alloy-steel blade
• Light gauge aluminum
• Outstanding cutting performance

Cons:

• Someone complained about rails had little burrs

Why do we recommend this product?

The 10″ 200 Tooth Aluminum/Plastic Cutting Circular Saw Blade with 5/8″ Arbor from IVY Classic is a steel blade designed for cutting light gauge aluminum plastic and vinyl siding up to 1/8″ thick.

Oshlun SBNF-120120 – best circular saw blade for vinyl siding

Product review:

The Oshlun is the fastest vinyl siding blade and is designed to cut cleanly through the most rigid materials, fiberglass, and plastic. This blade features a negative hook angle that increases safety at the cutting site by reducing kickback during operation. In addition, the Oshlun has triple chip teeth for fast, efficient cuts with less vibration than traditional blades.

The 12-Inch 120 Tooth TCG Saw Blade is a professional grade C-1 carbide blade that cuts non-ferrous metals. This saw blade has a negative hook angle to prevent binding, precision ground carbide tips for the best possible finish, copper plugged expansion slots to reduce noise and vibration, and an expanded steel back with two set screws to hold the blade in place.

Technical Detail

The Oshlun is a 12 inch Triple Chip Grind saw blade with a 1 Inch Arbor for Aluminum Non-Ferrous Metals. The weight of this blade is 3 pounds, and its dimensions are 13.78 x 12.28 x 0.35 inches.

Features:

PERFECT BLADE

• The Oshlun SBNF is a 12-Inch 120 Tooth TCG Saw Blade.
•  It has a 1-Inch Arbor for Aluminum Non-Ferrous Metals and is made of Professional Grade C-1 Carbide. 

MATERIAL

• This blade has a Negative Hook Angle Triple Chip Tooth Grind Precision Ground Carbide Tips, and Copper Plugged Expansion Slots, triple chip tooth.
• It also features reduced noise and vibration due to the negative hook angle and triple chip tooth.

BURR FREE CUTS

• The Oshlun SBNF is used to cut ferrous metals and lasts longer than other blades because it leaves clean burr-free cuts. 
• The micro-grain tungsten carbide tips are precision ground to last longer than other blades.

Pros:

• Copper plugged expansion
• All types of non-ferrous metals
• Reduced noise and vibration 

Cons:

• Someone complained about creating a little noise 

Why do we recommend this product?

The Oshlun 12-Inch 120 Tooth TCG Saw Blade is a professional grade C-1 carbide blade with a negative hook angle. The triple chip tooth grind provides precision ground carbide tips for cooler operation, reduced noise, and vibration; copper plugged expansion slots for longer life, and a clean burr-free cut.

Freud LU5A20 – best non-ferrous vinyl siding blade

Product review:

The Freud LU5A20 is the best triple vinyl siding blade, with a 420mm (16-1/2 inch) 96 Tooth Carbide for cutting aluminum and non-ferrous metals. The edge features a 30mm arbor and flat triple chip tooth design with a positive hook angle that provides fast & smooth cuts in stainless steel, brass, copper, bronze, cast iron, aluminum, and other non-ferrous metals.

The Freud is the positive hook angle of this blade that allows it to cut through metal like butter! This blade has an ideal 2-degree positive hook angle to give you the most efficient cutting experience possible.

Technical Detail

The 30mm arbor and flat triple chip tooth design provide a positive hook angle, high feed rate, low vibration, and long life. The weight of this blade is 8 pounds, and its dimensions are ‎1 x 1 x 1 inch.

Features:

EASY TO USE 

• This Freud LU5A20 saw blade is designed to cut through aluminum and non-ferrous metals. 
• The 30mm arbor makes it easy to use on your table saw, miter saw, or radial arm saw.

TIPPED BLADE 

• The 420mm 96 teeth carbide-tipped blade is ideal for cutting aluminum and non-ferrous metals.
• A positive hook angle provides a clean cut every time.

Pros:

• 30mm arbor and flat triple chip tooth design 
• For cutting aluminum and non-ferrous metals
• 420mm 96 tooth blade

Cons:

• Slightly Expensive

Why do we recommend this product?

Freud LU5A20 420mm 96 Tooth Carbide Tipped Blade for Cutting Aluminum Non-Ferrous Metals 30mm arbor and flat triple chip tooth design positive hook angle. Ideal for cutting aluminum and non-ferrous metals. 

Evolution RAGE 355 BLADE – best faster vinyl siding blade

Product review:

The Evolution Rage is a replacement vinyl siding blade. This multi-material cutting blade can be used to cut wood, steel, aluminum, and plastic easily. The Rage has a 14” diameter blade made of high-quality hardened steel designed to work with both the Evolution Rage2.

The Evolution Multi-Material Blade is a replacement blade for the Rage2 14″ multi-purpose Chop saw and the Evosaw380 15″ steel cutting Chop saw. It cuts through materials faster than standard blades with no burrs or heat produced. Just loosen the screws to remove the old one, slide in a new one, and tighten them back down.

Technical Detail

This blade can cut through steel, aluminum, wood, and plastic. It cuts through materials faster than standard blades with no burrs or heat produced. The weight of this blade is 3.4 pounds, and its dimensions are ‎14 x 0.08 x 14 inches.

Features:

MULTIPURPOSE 

• It is a replacement blade for the Rage2 14″ multipurpose Chop saw and Evosaw380 15″ steel cutting Chop saw.
• It cuts wood, steel, aluminum, and plastic.

CUTS THROUGH STEEL

• The Evolution cuts through steel, aluminum, wood, and plastic with ease. No coolant is required. Produce virtually no heat, burrs, or sparks.
• Used with Rage2 14″ multipurpose chop saw and Evosaw380 15″ steel cutting chop saw.

EASY TO USE 

• Install in your saw’s arbor (the shaft that connects to the motor). Make sure you are using the correct way.
• Just loosen the screws to remove the old one, slide in a new one, and tighten them back down.

Pros:

• No coolant required
• Produce virtually no heat, burrs, or sparks
• Cuts through steel, aluminum, wood, and plastic

Cons:

• Someone complained late response

Why do we recommend this product?

Evolution RAGE 355 BLADE-14″ Multi-Material Blade Replacements for Rage2 14″ Multipurpose Chop saw and Evosaw380 15″ Steel Cutting Chop saw. Cut through steel, aluminum, wood, and plastic. No coolant required Produce virtually no heat, burrs, or sparks. 

Vinyl siding blade Buying guide

The Vinyl siding blade Buying guide is an excellent resource for those looking to purchase a blade. This guide will give you some advice on Vinyl Siding Blades to make an informed decision with your purchase.

Size

The first factor is the size of the siding blade. You will want to make sure that the Vinyl Siding Blade you choose is the right size for the job at hand. If you are looking to purchase a blade for a small project, you don’t need a large Vinyl Siding Blade. Conversely, if you want to do a more important job, you will need a Vinyl Siding Blade to handle the workload.

Types of blade

The second factor is the type of Vinyl Siding Blade you should buy. There are two types of blades: standard and reverse-cycle. Standard Vinyl Siding Blades are cut in one direction, while reverse-cycle edges are cut in both directions. The choice between these two types of blades depends on your personal preference.

Brand

The third factor to consider is the brand of Vinyl Siding Blade you are purchasing. There are several different brands on the market, so it is essential to research before buying.

Price

The last factor to consider is Blade’s price. Of course, vinyl siding blades aren’t costly, but there are a few things you can do to make sure you get the best deal on your Vinyl Siding Blades.

• Standard Vinyl siding blade cuts in one direction while reverse cycle cut in both directions
• There are several different brands available, so it is essential to research before making a purchase decision
• Vinyl siding blades aren’t too pricey, but there are some ways to get them at better prices.

FAQS of vinyl siding blade

Vinyl siding blades are a versatile option for homeowners who want to install vinyl siding. Vinyl blades can be used with both metal and wood frames, providing an easy way to get the job done. In addition, vinyl siding blade FAQs will help you avoid common mistakes that could lead to costly repairs later on!

Q. What saw blade is best for vinyl siding?

Vinyl siding blades are a versatile option for homeowners who want to install vinyl siding. Vinyl blades can be used with both metal and wood frames, providing an easy way to get the job done.

Q. What are some of the benefits of using a vinyl saw blade?

Vinyl saw blades offer several benefits, including:

• Versatility: Vinyl saw blades can be used with both metal and wood frames
• Easy installation: Vinyl saw edges make it easy to cut through vinyl siding quickly and easily
• Increased durability: Vinyl saw blades are designed to last longer than standard saw blades, making them ideal for cutting through vinyl siding materials
• Precise cuts: Vinyl saw blades create clean, accurate cuts, ensuring that your vinyl siding looks great.

Q. What is the best tool to cut vinyl siding with?

Vinyl saw blades are designed to create clean, precise cuts in vinyl siding materials for a professional-looking finish. Vinyl saw blades should be used on miter saws or other handheld power tools that can easily cut through vinyl siding material. Vinyl saw blade types include:

• Coated: Coated blades come in several different varieties and allow you to cut through various kinds of materials while keeping them intact. Choosing an appropriate coated type is essential because it will determine what kind of material your blade can work best with
• Carbide Tipped: Carbide tipped blades offer increased durability compared to standard metal alloy tips; they also increase wear resistance due to their complex coating design, allowing them to stay sharp for a longer time.

Q. What miter saw blade for vinyl siding?

A Big 10-inch (250mm) circular blade fits the most powerful miters for cutting Vinyl Siding. Look for a specially designed blade to cut vinyl; the coating on the blade prevents it from chipping and cracking the siding material. The best blades have an 80-tooth configuration, which provides a clean finish without damaging the surface of the vinyl.

Q. What should I look for when buying a new blade?

Vinyl siding blades are designed with a hard coating that increases wear resistance and prevents chipping or cracking of the vinyl material. They also have a higher tooth count (80) than standard metal alloy tips, providing a cleaner finish without damaging the vinyl surface. Still, they can be more expensive due to their specialized design and durability than a regular all-purpose miter saw blades.

Standard metal alloy tips are designed for cutting many types of materials from wood, plastic, aluminum, or steel, among others, so it is essential to buy one intended explicitly for best use on your particular and any safety equipment required for its use.

Vinyl is a popular material used in the construction of homes today, including siding for both interior and exterior sides and shingles, gutters, or downspouts without any damage to it during cutting. Vinyl can be cut with standard miter saw blades usually advertised for soft materials like wood, but there are multiple types available depending on your specific needs.

Conclusion

 We have 5 recommendations for you to consider when purchasing a vinyl siding blade. First, know the size of your deck or roof. It will determine what type of blades are best suited for you and save you time selecting an appropriate product. Second, decide whether you prefer manual or electric blades because there are no one-size-fits-all answers here; each has its pros and cons depending on how much work needs to be done by hand vs. with electricity (or both).