Cleaning floors with vinegar and baking soda

This post contains affiliate links. As an amazon associate, I earn affiliate commission, from qualifying purchases.

Cleaning floors with vinegar and baking soda has so many benefits. They’re cheap, environmentally friendly, and they work wonders. You can use them on any floor. 

Do you clean your floors with vinegar and baking soda? If not, then I think you should reconsider. Vinegar is a natural disinfectant that can kill germs and bacteria on your floor, while baking soda helps scrub away dirt from the surface. 

This combination is safe for the environment and makes it easy to remove tough stains like pet urine! It’s cheaper than most store-bought cleaners too! Continue reading with us for more information about using cleaning floors with vinegar and baking soda. 

9 Effective Tips for Cleaning Floors with Vinegar and Baking Soda

Cleaning floors can be a difficult task, but it doesn’t have to be. Vinegar and baking soda are two of the best cleaning products for your home. They work well on many surfaces, including hardwood, ceramic tile, and linoleum. They are both very safe and gentle cleaners that don’t contain any harsh chemicals or abrasives. In this article, we will give you 10 tips for using these natural ingredients to clean your floors effectively! you can use a vacuum to clean your tile floors.

Tip #01: You can use vinegar and baking soda to clean a wide variety of surfaces, so it’s great for cleaning your floors. Just mix them in equal parts and spray the mixture onto the floor. Let sit for about 30 minutes before scrubbing with a damp rag or sponge.

Tip #02: Cleaning with these natural products is very safe because they are toxic-free, which means that you do not have to worry about harsh chemicals seeping into carpets or other porous surfaces like wood when used correctly!

Tip #03: If you’ve spilled something on your hardwood or any other type of delicate material, you should treat it as an emergency by using white vinegar and water instead of the baking soda and vinegar mixture.

Tip #04: Vinegar is a great cleaning agent that can clean almost anything, so it’s also good for getting rid of pet stains! It doesn’t have any fragrance like some other cleaners do, but you’ll be able to smell the fresh scent after using it on your flooring. You should avoid using ammonia-based products if possible because they might leave behind foul odors in addition to making floors slippery.

Tips #05: Be sure not to use too much water when dampening your sponge or rag with this solution, as otherwise, you could leave an excess amount of moisture on the surface, which encourages mold growth over time! Only moisten enough to make the cloth very wet.

Tips #06: Sprinkle baking soda on your floor and then pour the vinegar solution over it!

Tip #07: Cover any fabric surfaces with a tarp or drop cloth, as this mixture can damage them if left to rest too long. Let sit for about an hour before blotting up excess liquid. The gas from these two substances can cause reactions in some people with asthma, so be cautious when doing this around children and pets.

Tip#8: The other effective tip for cleaning floors with vinegar and baking soda is to combine an equal amount of each in a bucket or spray bottle, but only use this solution on non-carpeted surfaces as it can be difficult for carpets to dry.

Tip#9: To finish things up, mop the floor with warm water using your regular products (i.e., dish soap) and then let air dry!

Tip #10: Carpeted surfaces will take longer to dry than non-carpeted ones, so if there is any carpeting in your home that’s not apt to absorb moisture quickly, it might be better off putting down some towels before mopping both sides of this mixture on top of them).

How to clean tiles with vinegar and baking soda?

There are many ways to clean your tiles, but this is a really simple and inexpensive way that anyone can do it. In just five steps, you’ll have shiny, spotless tiles!

Step One: Pour a cup of vinegar into a bucket. Add two cups of baking soda to the mix and then fill the rest up with water.

Step Two: Grab your scrubbing brush- you can use any bristles, but for tough grime, try using an old toothbrush or some other scratchy bristle broom. Put on rubber gloves if this is going to be inside work. Dampen them in the water from step one as well, so they are more slippery when you’re cleaning!

Step Three: Scrub away at all those dirty tiles until they are shiny once again! Make sure that there’s no residue left behind because it will just get more contaminated over time. If needed, go back and scrub again.

After you do, rinse the tiles with a hose or tub of water and then dry them off to make sure that they are spotless! If it’s outside work, be sure to wash your brush as well, so any dirt is removed from those bristles.

Step Four: Rinse out your bucket and put away all supplies for next time when needed!

Step Five: Take some deep breaths after spending hours on this tedious job – but also feeling accomplished at the end because now you have clean tiles!

Benefits of using vinegar and baking soda to clean floors

Cleaning your floors is a task that can be difficult to complete. There are so many different types of flooring materials that require various cleaning products, and it can take hours for the job to get done. But did you know there are natural ways to clean your floors? Vinegar and baking soda are two ingredients that will work wonders in cleaning your hardwood, tile, or linoleum floors! Here we’ll discuss some reasons why you should use these two powerful cleaners on your floor!

  • Vinegar and baking soda work wonders on stains! If you have a stain in your kitchen, bathroom, or any other part of the house that has been hard to clean with traditional cleaning products, this is an excellent option for you. This mixture can remove tough stains without hurting your flooring.
  • The smell! There’s nothing quite like coming home from work or school and smelling freshly cleaned floors. Using vinegar and baking soda not only cleans the surface but also removes odors- giving off that fresh scent throughout the entire house. Not keen on the fragrance? Add essential oils to give it some extra oomph, such as lavender which helps promote relaxation after a long day at work!
  • It’s cheaper. The costs of vinegar and baking soda are much lower than traditional chemical cleaners, saving you money in the long run.
  • It doesn’t contain any harsh chemicals. Chemical-free cleaning is excellent for all members of your family! No one likes to be around a strong-smelling cleaner that can make them sick or give them an allergic reaction. Thankfully vinegar and baking soda don’t have those side effects on people, making it safe for everyone to use!
  • You’ll save time by using this method because there is no buffing necessary when following these steps.
  • There is less work involved with surface materials such as tile floors since they’re already sealed, so if you’ve been frustrated with tiles because they’re slippery to clean, you’ll be able to use this technique without worrying about the extra work.
  • It’s a great way to avoid harsh chemical fumes in your home—the fewer chemicals used around our family and pets, the better.
  • You won’t need any other tools like brushes or mops, which means that your cleaning supplies will come from vinegar and baking soda. It is a huge help when it comes time for laundry day since fewer items can get lost or ruined during transportation.
  • There is no strong smell left behind after using these methods, so if you have guests coming over soon, then it will not offend them at all and


If you want to avoid harsh chemicals and strong smells, here’s how vinegar you could use as a natural cleaner. For tough jobs like removing odors from carpets or flooring, adding baking soda is an effective way to eliminate dirt and grime without using detergents containing bleach. Follow our tips for a hassle-free cleaning with these simple recipes!

Leave a Comment